Precision wire manufacturing

Contact

  • Dig pickling of steel parts
  • Continous pickling of wire and edge wire << 30 mm² cross-sectional area

  • Vacuum- and protectivagas-glowing in pot- and hat furnaces
  • Harden and temper of round- and edge dimensions (<< 20 mm² cross-sectional area) in rings

  • Drawing wire in size range 0,6 – 16 mm respectively edge dimensions
  • Drawing wire to rod in size range 0,8 – 16 mm

  • Rolling of edge dimendions until 40 mm² cross-sectional area from cross section area in round and edge

  • Grinding rods in size range 4,5 – 30 mm
  • Grinding and polishing rods in size range 2 – 30 mm

  • Draw peeling (peeling) wire in size range 4,5 – 15 mm

  • Judge and cutting wire to rods in size range 0,8 – 17 mm

  • Removal cutting rods in size range 2 – 50 mm

  • End cutting, plotting and/or chamfer rods in size range 4 – 13 mm with chamfer angle 30° or 45°

  • Surface testing rods with eddy-current in size range 2 – 20mm
  • Cross-section testing rods with ultrasound in size range 5 – 13,5 mm

Embodiment

Size in mm

Tolerance

Wire
drawn Ø 0,6 – 16 >= 9
draw-shaved Ø 4,5 – 15 >= 11
edge- and profiledimensions drawn 4 edge 1,5 – 8,0 >= 9
6 & 8 edge, 1,5 – 10,0
width 1,0 – 8,0
size 0,5 – 5,0
width: size = max. 6:1
edge- and profiledimensions rolled until 40 mm² cross-section >= 9
Bar
drawn bars Ø 0,8 – 16 >= 9
grounded bars Ø 4,5 – 30 >= 7
grounded and polished bars Ø 2 – 30 >= 6
edge dimensions in bars 4 edge 1,5 – 8,0 >= 9
6 & 8 edge 1,5 – 10,0
width 1,5 – 5,0
size 1,5 – 8,0
width: size = max. 6:1
flat bars Ø 0,8 – 17
end processing Ø 4 – 13, 30° or 45°
detaching and cutting Ø 2 – 50
check eddy current Ø 2 – 20

ultrasonic Ø 5 – 13,5