Melting Route

Airmelted + Remelted

Product Description

BÖHLER W300 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2343 (X37CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as good hot hardness and very good resistance against heat-checkings. The combination of these properties makes it a top performer in high- and low-pressure die casting as well as in closed-die and open-die forging. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.

Property Features

  • Toughness & Ductility: high
  • Wear Resistance: good
  • Machinability: very high
  • Hot Hardness (red hardness): good
  • Polishability: very high
  • Thermal conductivity: high
  • Micro-cleanliness: high

Technical Specifications

High temperture strength High temperature toughness High temperature wear resistance

Material Numbers


1.2343 X37CrMoV5-1 T20811 H11 SKD6 D1830


Standards


4957 G4404 #207

Chemical Composition

Chemical composition (average %)
0.38 0.90 0.40 5.20 1.30 0.45

Available product shapes

Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).

  • Long Products
  • Open Die Forgings
  • Plates

Fairs & Events

Contacts

BÖHLER Worldwide

Please choose your market and find your local contact.

Worldwide

Please use a browser that is not outdated.

You are using an outdated web browser.

Errors may occur when using the website.